Tecus has developed the line of home automation products that includes the central “brain” (TecusHUB®), the control centre that operates on a world recognized, standardized technology interface protocol for communication among devices used for home automation. It uses RF for signaling and control. Zwave was developed by Zensys, Inc. a start-up company based in Denmark. Z-Wave is a standard in wireless technology that allows smart devices talk to one another. Household products like lights, door locks and thermostats are made “smart” when Z-Wave connectivity is added inside the product’s design, giving them the capability to communicate and perform the desired functions. Z-Wave operates wirelessly and securely and devices can be easily accessed and controlled on the owner’s smart phone, tablet, laptop computer or any other common usage mobile device.
Z-Wave is a very efficient, low-energy technology. Many Z-Wave devices work on battery power alone, often for a year or more before needing new batteries. Others plug into the wall, and there are even Z-Wave controllable AC outlets, that allow an entire home's electrical system to be 'smart' and energy-efficient by controlling and optionally monitoring energy usage. Z-Wave will not interfere with an existing Wi-Fi network. Z-Wave works on a different frequency, so there will be no interfering with Wi-Fi or other common household device signals. Z-Wave runs on type of network called a "mesh network.” One Z-Wave product will pass the signal along to another (“hop”) until the final destination is reached. Every connected device in a home acts as a messenger; the more devices, the more powerful and strong the network is.
Home automation systems usually include the following components and functions.
• Control Centre (The Brain) with a choice of WiFi or WiFi + 3G, the latter being a mobile communications standard that allows cell phones, computers, and other portable electronic devices to access the Internet wirelessly.
• Smart Door Locks.
• Door Sensors.
• Smoke Detectors.
• Siren Alarm.
• Motion Sensors.
• Water Leak / Dampness Sensor.
• Backup Battery Unit
• Gas Sensor.
• Video Cameras
• Microphone
• Speaker
• Monitoring
• A Personal Health Alarm Device
• Connectivity to local Police and Fire Departments
Tecus system is not hard-wired, therefore it does not require an electrician or technician to install. All components are plugged in and can be installed by a home or business owner with a little bit of technical knowledge and the installation guide. A control application or “app” is downloadable from the company website for smart phones or tablets. The app can be scanned using a QR reader to scan the code on the company website or it can be downloaded onto the mobile device through Google Play Store. The app is free and provides fingertip control of the Tecus home system from anywhere in the world. Incorporated is a 24/7 monitoring system that alerts the homeowner of any incidents that occur when one of the sensors is activated. If an alarm indicates a break-in or a fire, the local police and fire department are also alerted.
Z-Wave is a very efficient, low-energy technology. Many Z-Wave devices work on battery power alone, often for a year or more before needing new batteries. Others plug into the wall, and there are even Z-Wave controllable AC outlets, that allow an entire home's electrical system to be 'smart' and energy-efficient by controlling and optionally monitoring energy usage. Z-Wave will not interfere with an existing Wi-Fi network. Z-Wave works on a different frequency, so there will be no interfering with Wi-Fi or other common household device signals. Z-Wave runs on type of network called a "mesh network.” One Z-Wave product will pass the signal along to another (“hop”) until the final destination is reached. Every connected device in a home acts as a messenger; the more devices, the more powerful and strong the network is.
Home automation systems usually include the following components and functions.
• Control Centre (The Brain) with a choice of WiFi or WiFi + 3G, the latter being a mobile communications standard that allows cell phones, computers, and other portable electronic devices to access the Internet wirelessly.
• Smart Door Locks.
• Door Sensors.
• Smoke Detectors.
• Siren Alarm.
• Motion Sensors.
• Water Leak / Dampness Sensor.
• Backup Battery Unit
• Gas Sensor.
• Video Cameras
• Microphone
• Speaker
• Monitoring
• A Personal Health Alarm Device
• Connectivity to local Police and Fire Departments
Tecus system is not hard-wired, therefore it does not require an electrician or technician to install. All components are plugged in and can be installed by a home or business owner with a little bit of technical knowledge and the installation guide. A control application or “app” is downloadable from the company website for smart phones or tablets. The app can be scanned using a QR reader to scan the code on the company website or it can be downloaded onto the mobile device through Google Play Store. The app is free and provides fingertip control of the Tecus home system from anywhere in the world. Incorporated is a 24/7 monitoring system that alerts the homeowner of any incidents that occur when one of the sensors is activated. If an alarm indicates a break-in or a fire, the local police and fire department are also alerted.
With Access Control, all you need to do is to wipe their info from your computer. There are many uses for the access control, more detailed, please visit our site:
ReplyDelete#CCTVInstallation, #CCTVInstallationLondon, #CCTVInstallationnearme, #CCTVCameraInstallationnearme, #HomeCCTVInstallation, #HomeAutomation, #HomeAutomationSystem, #BesthomeAutomationSystem, #HomelightingAutomation, #SmartHomeAutomation, #HomeAlarmSystemInstallation, #HomeAlarmInstallation, #HouseAlarmInstallation, #BurglarAlarmSystem, #BurglaAlarmInstallation
Smart Home Automation
Home Security Systems, Really I enjoy your site with effective and useful information. It is included very nice post with a lot of our resources.thanks for share. i enjoy this post.
ReplyDelete